Hiddin's Low Freestanding Zig Zag Pet Gate is your alternative to the unattractive wood or metal pet gates that are unsightly and difficult to use. Our 24" high, freestanding pet gate is designed to confine your pet safely in areas with larger openings. It is 24" high, it is perfect for small and medium size dogs and is easy to step over. To set up, open the folding gate so that it spans the doorway, then rest the end panels against the doorway molding, on the same side as your pet. This setup prevents your pet from pushing the gate. 8-Panel: 120"w x 24"h x .25"d (for openings 110" or less; 48 lbs.) Each panel is 15"w x 24"h x .25"d Use & Care -Before transporting the gate, close all panels so all handles are aligned, then carry or move it in the closed up position. -Carry the gate using the laser cut, integrated handles. -Do not transport the gate when the panels are extended. -Acrylic panels must be hand washed only. -Do not use chemical cleaners on acrylic. Assembly Instructions The Zig Zag Gate comes pre-assembled, out of the box. No assembly is required, however to ensure that your clear hinges last a long time, you must do the following when using/moving the gate: 1. Before transporting the gate, close the gate so panels are folded against each other and all handles are aligned. 2. Carry the gate by putting your hand through the "lined up" handles. 3. Do not drag or transport the gate when the panels are extended because it puts unnecessary pressure on the clear hinges and will cause them to split over time.