Harriet 12-in. Globe Pendant
The dazzle is in the details of this statement piece that delivers dramatic impact to an interior. Ribbons and pearls of glass bedeck this expressive globe with a touch of artistic interest that is sure to spark conversation. Installation instructions: 1. Orient mounting bracket so raised center points toward outlet box (not included). Attach mounting bracket to outlet box with two machine screws. Insert threaded rod with lock nut into center of mounting bracket until it extends 1-1/4 in. below ceiling level. Secure threaded rod by tightening lock nut against bottom of mounting bracket. 2. Slide loop and canopy onto lamp assembly cord. 3. Trim lamp assembly cord 8-in. past knot. Remove 4-in. of cord jacket, and strip 0.75-in. of wire insulation. 4. Wire Connection Guide Ground Wire: - Wrap supply ground wire from outlet box around green ground screw on mounting bracket, at least 2-in. from wire end. Tighten green ground screw. Connect to fixture ground wire with wire connector and wrap with electrical tape. Supply Wires: - Connect neutral supply wire from outlet box to neutral fixture wire with wire connector, and wrap with electrical tape. - Connect hot supply wire from outlet box to hot fixture wire with wire connector, and wrap with electrical tape. NOTE: Fold and tuck connected wires into outlet box. 5. Slide canopy over threaded rod and secure to ceiling by screwing loop onto threaded rod. Remove unwanted links from chain on lamp assembly, and connect the top most remaining chain link to loop. 6. Insert bulb (not included). Use 60-watt max. medium-base incandescent bulb or a CFL equivalent.
- 12-in. D x 10.5-in. H
- Lighting sockets can support up to 100 watt bulb
- Assembly required
- Wipe clean
This item ships directly from the vendor, usually within 4 business days. Shipping Details
Returns are easy at belk.com. Easy returns